(click on any of the images for the full datasheets)

EB950CR Armstrong Barrier

EB950CR Armstrong Barrier

EB950CR Armstrong Security Barriers provide a high level of protection where central roadway foundations are not possible / practical. Designed to complement the range of Hostile Vehicle Mitigation (HVM) solutions, the EB950CR PAS 68 impact tested barrier can withstand direct impact forces in excess of 720 KJ, the barrier provides shallow mounted protection to sites from extreme Vehicle Borne Improvised Explosive Device (VBIED) attack.


EB1400CR Trojan Barrier

BARRIERS

The EB1400CR Trojan Security Barrier provides a high level of protection where central roadway foundations are not possible / practical.  Designed to complement the range of  Hostile Vehicle Mitigation (HVM) solutions, the EB1400CR Security Barrier can withstand direct impact forces of 1852KJ, the Barrier provides shallow mounted protection to sites from extreme Vehicle Borne Improvised Explosive Device (VBIED) attack.

The barrier has been independently physically tested conducted in accordance with PAS 68 (7500kg vehicle travelling at 80kph) by the Transport Research Laboratory (TRL).


Cedar Gate

Avon Cedar Gate

The Cedar Gate has been designed and developed around the original MDA barrier and Newey barrier, a UK government design of security gate providing a cost effective means of securing an entry or exit point whilst still providing a high level of protection.  The manually operated  lifting gate is a Hostile Vehicle Mitigation (HVM) solution, ideal for low volumes of traffic flow or where the access point is used infrequently.

The gate has been physically impact tested independently a number of times, in accordance with PAS 68 using 7500kg N2 vehicle travelling at 48kph (30mph) by the Transport Research Laboratory (TRL) and MIRA Ltd.


GC1100CR High Impact Hinged Gate

GC1100CR Hinged Gate

The GC1100CR High Impact Hinged Gate provides a high level of security against unauthorised vehicle access.  Designed to withstand substantial direct impact forces the gate is used to protect sites from extreme aggressive attacks. Manufactured by engineers with a wealth of experience in the fields of Hostile Vehicle Mitigation (HVM) Solutions , the GC1100CR is a highly dependable security product.

The manually operated hinged gate incorporates the crash tested vehicle restraint system (1852KJ resistance).


SG1100CR Armoured Vehicle Gate

SG1100CR Armoured Vehicle Gate

The SG1100CR High Impact Sliding Armoured Vehicle Gate provides a high level of security against unauthorised vehicle access.  Designed to withstand substantial direct impact forces the gate is used to protect sites from extreme aggressive attacks while maintaining a pedestrian secure environment.  The SG11100CR gate has been independently physically tested in a number of full scale crash tests conducted in accordance with PAS 68 by MIRA and the Transport Research Laboratory (TRL).


SG1500CR Armoured Vehicle Gate

SG1500CR Armoured Vehicle Gatea

SG1500CR High Impact Sliding Armoured Vehicle Gates provide a high level of security against unauthorised vehicle access.The SG1500CR gate was first independently physically tested by the Transport Research Laboratory (TRL) using an N3 european truck in accordance with the PAS 68 specification (7,500kg weighted vehicle travelling at 80kph) and post-test achieved zero penetration.  The same gate was then crash tested with a 4×4 pick-up truck travelling at 80 kph and zero penetration was achieved.

The gate design was then aesthetically enhanced by removing the front two support legs and independently tested by the Transport Research Laboratory (TRL) with a US truck (15,000lb truck at travelling at 50 mph)  in accordance with the US Standard ASTM F 2656-07 ( supersedes DoS SD-STD-02.01 ) again the gate stopped the vehicle and zero penetration was achieved.

Please note this is a specialist high security product and is designed for use with vehicles only


Garrison Ballistic Protection Gate

Garrison_Ballistic_Protection_Gate

The Ballistic Protection Gate provides a high level of ballistic protection integrated into a sliding gate to protect against unauthorised vehicle access and the threat of armed attack.

Designed & constructed to withstand a BR6 level weapon attack, the gate is used to protect sites from extreme aggressive ballistic threat while maintaining a pedestrian & vehicle secure environment.

Manufactured by engineers with a wealth of experience in the fields of Hostile Vehicle Mitigation (HVM) solutions, the ballistic gate is a highly dependable security product.

The gate’s constructed from material that has been independently physically tested and certified to comply with the highest internationally recognised standards.

Available in range of heights and clear widths.  Foundation depths are from 500mm subject to gate design.

Please note this is a specialist high security product and is designed for use with vehicles only


EB450 Parking Barrier

EB450 Parking Barrier

The EB450 Parking Barrier is an ideal automatic car park barrier for medium to high usage car parks and security control; it can easily integrate with revenue collection and access control systems.


EB750 Excel Barrier

EB750 Parking Barrier

The EB750 Excel Barrier is an ideal security barrier that can be utilised as an automatic traffic barrier for car parks and security control.  The barrier can easily integrate with revenue collection and access control systems and is recommended for a wider road width or if signage, lights or drop skirts are required for the boom.


EB950 Triumph Security Barrier

EB950 Parking Barrier

The EB950 Triumph Barrier is ideal for industrial car parks and security control; it can easily integrate with access control systems and is recommended for a wider road width or if signage, lights or skirts are required for the boom.


Atex Barrier

Avon Atex Barrier

The Atex Barrier is a rising arm vehicle control barrier designed to operate in the oil & gas, petrochemical, pharmaceuticals, chemicals & fertilizer industries. The barrier cabinet is categorised as an ATEX flameproof EX d enclosure and is certified to ATEX Group 2 Category 3.

The barrier is able to operate in hazardous environments or potentially explosive atmospheres: the working components are housed in a flameproof enclosure designed to withstand the pressure developed during an internal explosion and prevent the transmission of the explosion to the explosive gas atmosphere surrounding the enclosure